30
Air circulation openings must not be covered by any other installation parts. The surrounding air must
not be higher than 40 °C/104 °F. The back side fan must have 8.5
cm/3.35” of open space, and the
bottom fan must have 20 cm/7.87” of open space.
Assembly and safety instructions
•
The assembler has to make sure, that the device is still approachable after installing to allow for
maintenance
•
There must not be drawers, that are opened to the top, underneath the device.
•
The built-in device must be provided with enough space to the bottom side to ensure sufficient air
•
ventilation.
•
The maximum intake air temperature must not exceed 40°C in front of the cooling fans.
•
Having a sufficient air supply system, you have to ensure that already heated air does not get sucked
in by the devices again.
•
Please handle the sensitive glass with great care as you can see scratches after installation.
•
There must not be any flammable nor explosive objects beneath the device.
•
Please mind, that small parts can get sucked in.
•
The devices must be installed / placed with a distance to the rear or side wall or other appliances of
at least 5 cm (side) and 20 cm (bottom).
•
Please ensure that the removal of the plug is to be such that an operator can check from any of the
points to which he has access that the plug remains removed.
•
Make sure, the cut-out gap after installation is filled with silicon to protect against water or other
liquids ingress.
Summary of Contents for 1 14 200 00
