GASTRON GTL-200, Instruction Manual

Page: 7 / 14

www.gastron.com
12
_
13
GTL-200
Instruction Manual
[Table 4. Beacon Type Configuration Description]
No NAME DESCRIPTIONS
1 Case Body Protects internal PCB and other parts by body
2 Case cover Protects internal parts by body
3 Case Glass Cover Protects internal Glass and other parts by body
4 Explosion Light Glass It is an explosion-proof case made of glass material and disperse light to outside.
5 Case Glass Ring Prevents diversion during explosion light glass fastening.
6 Gasket Prevents diversion during explosion light glass fastening.
7 O-Ring/1 Inhibits inlet of dust, particles, water, gas
8 Reflector Diffracts LED light to emit.
9 Reflector troll plate Works as rotating plate that rotates reflector.
10 Motor troll plate Works to deliver rotating speed of motor.
11 Motor Works to rotate reflector.
12 Led assy plate(bracket) Fastens LED Assy to the body.
13 lens Lens for light source that emits LED light.
14 Heat sinking plane Heat-proof body that decreases LED temperature and increases lifetime.
15 Bearing washer Washer for bearing that operates rotating plate to decrease friction.
16 Heat sinking plane-Net Net that fastens heat-proof plate to LED assy plate (bracket)
17 Cage Protective mesh for Explosion Light Glass
18 Terminal pcb AC/DC Power Supply
19 Main pcb Operates by receiving signal upon an error in LED/Speaker/Motor
20 Led pcb set PCB with LED
3.3. Beacon Type Components
[Table 3. Beacon Type Configuration]
3. Name and Description of Each Part 3. Name and Description of Each Part