background image

Gas & Flame 

Detection System

GTL-200

Instruction Manual

www.gastron.com

02

_

03

When abnormalities occur after purchasing the product,
please contact the following address.

·Address : 23 Gunpo Advanced Industry 1-ro,
 

  Gunpo-si, Gyeonggi-do

·Tel  

: 031-490-0800

·Fax  

: 031-490-0801

·URL 

: www.gastron.com

·e-mail  : [email protected]

Thank you very much for purchasing a product from Gastron Co. Ltd.

Our Gastron Co.Ltd. is a company specialized in Gas Detector & Gas Monitoring System and have been 
recognized by many customers for the best quality and use convenience. We always seek to help our 
customers to find the product they need and we continuously research to develop gas detectors that 
satisfies our customers. From now on, you can solve all problems related to gas detectors with the 
products of Gastron. We Gastron will be responsible for your satisfaction.

This user manual describes operation and simple maintenance methods etc. for the gas detector. 
Please read carefully and store it in a safe place. Using it as a reference will help a lot when you have a 
question during use.

The product and manual are subject to change without a notice for the product's functional improvement and ease 
of use.

■ Only an individual specialized in explosion-proof devices and warning lights may disassemble 
  the device.
■ Please contact our company's technical support, e-mail, or website for inquiries related to 
  inspection and calibration of the explosion-proof warning light.

Greetings

Summary of Contents for GTL-200















Reviews: