IMPORTANT: Never
assemble the appliance with the
chopper attachment AND the crossed-blade knife with the
mincer plate
a. Assemble the mincer head in the opening of the drive shaft.
Place the worm inside the mincer head (operate according to
the instructions ´Assembling` the appliance. see fig. 1 and 2).
b. Place the chopper attachment A on the axis of the worm.
The slim end has to face the front (see fig. 7). Turn the chopper
attachment a little bit while pushing it into the mincer head.
c. Place the chopper attachment B on top of the chopper
attachment A. The wide opening of the chopper attachment B
should be facing the chopper attachment A. The chopper
attachment B has a gap on the outside edge which should slide
over the guiding pin on the inside of the mincer head (see fig. 8).
d. Attach the closing ring to the mincer head and screw it on
tight with your hands.
5. Process the wrapping mixture in the mincer with the attached
chopper attachments (see fig. 9). The finished product will be one
long wrapping. Cut the wrapping into convenient seize.
6. Freeze the wrapping shortly.
7. Fill the wrapping with the filling mixture.
8. Fry the wraps with some olive oil until it has the favored
browning.
Care and cleaning
WARNING: Never
hold your face or other body parts over the feed funnel when the motor
is running because little pieces of food could be thrown out of the feed funnel.
Never
put
foreign substance or hard objects into the feed funnel.
Before the mincer is used for the first time, all parts – with the exception of the motor block –
must be thoroughly cleaned in warm soapy water.
27
41402_Manual_Neu.qxp 20.12.2006 11:42 Seite 27
