EN
34
Problem
Reason
The Solution
The gasket seal is not pro-
perly in place, damaged,
or food is sticking to the
sealing surfaces.
Ensure that the gasket seal at the inner rim of the blade
base is clean and inserted properly.
The edges of the mixing
jar are polluted or chip-
ped.
Clean the upper rim and thread of the mixing jar. DO NOT
use the mixing jar again, when the glass is chipped or bro-
cken in any way. Get in contact with your vendor.
When removing the
mixing jar, the blade
assembly sticks to the
motor base AND/OR liquid
runs out onto the motor
base and/or accumulates
under the appliance.
The blade assembly has
not been turned on as
tightly as required AND/
OR there are residues of
sticky food on the cou-
pling of the motor base
AND/OR the gasket seal
of the blade assembly is
damaged or polluted.
Immediately unplug the appliance.
Grasp the mixing
jar and motor base and turn the complete appliance upside
down. Then, turn off the mixing jar. If the blade assembly
stays within the coupling of the motor base,
protect your
hands with working gloves or a tough cloth
folded several times
, for removing the blade assembly.
Clean the coupling of the motor base, exterior of the blade
assembly, the gasket seal, and the upper rim of the mixing
jar (see: ‘Care and Cleaning’). When assembling the mixing
jar, ensure that you turn on the blade assembly correctly for
getting a really leakfree seal. No liquid may run out, when
turning the mixing jar upside down.
Your food has been too
hot, when being filled in
AND/OR you filled in any
alcoholic food.
Do not fill any hot food into the mixing jar!
Your food may be no more than lukewarm.
Do not
attempt to process alcoholic food or beve-
rages!
During processing, the alcohol may evaporate,
thus building-up pressure within the mixing jar.
CARE AND CLEANING
WARNING
– Always ensure that the appliance and all its parts are
out of
reach of children younger than 8 years and animals
. Always unplug the appliance,
before moving or cleaning the appliance. Do not hold your hands or any foreign
objects into the coupling on the motor base with the appliance still connected to the
power supply. Do not immerse or place the motor base or the power cord in water or
any other liquid. Do not spill or drip any liquids on or in these parts to avoid risk of fire
and electric shock.
DO NOT place the motor base or power cord in an automatic
dishwasher.
Handle the blade assembly with care to avoid injuries, because the
blades are very sharp. Do not attempt to disassemble the blade assembly.
Do not use scouring pads, abrasive or corrosive cleaning agents (e.g. bleach, sol-
Summary of Contents for DESIGN SMOOTHIE MAKER MIX & GO
Page 20: ......
Page 39: ...EN 39 ...
