EN
EN
8
9
• To avoid damage to the grinder: Do not fill pre-ground coffee pow-
der into the bean hopper. Only fill the bean hopper with fresh, dry,
whole coffee beans that are fit for consumption. Do not use the grin-
der for grinding any other materials or food. Always keep the grinder
chamber completely dry.
• Always unplug the appliance, before cleaning the appliance, or
when the appliance is not in use. Additionally, empty the bean hop-
per and interior of the grinder chamber, when the appliance is not in
use for an elongated time. Always hold the machine at the housing
for moving the appliance.
Do not hold the appliance at the bean
hopper, grinder head, or power cord for moving the appliance.
• Keep the appliance and its parts and accessories clean (see: ‘Care
and Cleaning’). Do not use any abrasive cleaners, cleaning pads
(e.g. metal scouring pads), or any corrosive cleaners (e.g. disinfec-
tants) for cleaning.
•
Do not place the grinder in an automatic dishwasher.
IMPORTANT SAFEGUARDS FOR ELECTRICAL APPLIANCES
Place the appliance near a suitable wall power outlet to connect the
appliance directly to a protected mains power supply with protective con-
ductor (earth/ground) connected properly. Ensure that the voltage rating
of your mains power supply corresponds to the voltage requirements of
the appliance (230 - 240 V, 50/60 Hz, AC, rated for at least 8 A). The
installation of a residual current operated circuit breaker (r.c.c.d.) with a
maximum rated residual operating current of 30 mA in the supplying elec-
trical circuit is strongly recommended. If in doubt, contact your electrician
for further information.
• In various foreign countries, the specifications for power supplies are
subject to incompatible norms. Therefore it is possible that power sup-
plies in foreign countries do not meet the requirements for safe opera-
tion of the appliance. Thus, before operating the appliance abroad,
ensure that safe operation is possible.
• Do not use any desk top multi socket outlet, external switching device,
remote control systems, or extension cord to avoid risk of fire or elec-
tric shock. Ensure that the power outlet socket used is always accessi-
ble for unplugging the appliance immediately in case of malfunction
or danger.
• The appliance may not be operated on metal surfaces (e.g. sink) to
avoid risk of electric shock. Do not touch the power plug or the appli-
ance with wet hands, when the appliance is connected to the power
supply.
• DO NOT pour or spill any liquids on or under the housing or on the
power cord or in the bean hopper when the bean hopper is installed
on the grinder chamber. Do not immerse the appliance, power cord,
or power plug in water or other liquids. Do not place the appliance
on wet surfaces. Protect the appliance from splashing water. If liquids
are spilled on or into the appliance, immediately unplug and dry the
appliance and, with all parts disassembled, let it dry naturally for at
least 1 day (see: ‘Care and Cleaning’).
• Power cords may never be knotted, twisted, strained or squeezed.
Do not let the power plug or power cord hang over the edge of the
table or counter. The power cord may not touch hot surfaces or sharp
edges. Ensure that no one will pull the appliance by the power cord.
Take care not to entangle in the power cord. Always grasp the power
plug, when disconnecting the power cord.
MOVING PARTS – RISK OF INJURIES
Your new DESIGN COFFEE GRINDER ADVANCED PLUS is designed
for grinding coffee beans. For this purpose, the sharp-edged grinding
burrs are rotating in the grinder chamber. Improper handling could cause
severe injuries and damage.
• Do not insert your hands or any foreign objects (e.g. clothes, brushes,
cooking utensils) in the grinder chamber, bean hopper, or the pow-
der outlet, with the appliance connected to the power supply. Always
unplug the appliance before moving the appliance, and before
assembling, disassembling, or cleaning the appliance, and before
removing the storage container.
