EN
EN
20
21
Problem
Mögliche Ursache
Die einfache Lösung
Using the storage contai-
ner:
The grind time is set
to “0”.
For grinding into the storage container, you must set a
sufficient grind time.
Filling a portafilter:
The
portafilter cradle is missing
or not installed correctly.
Slide the portafilter cradle into the runners directly below
the grinder outlet and push the portafilter cradle to the
rear wall of the grinder cavity to the stop.
Filling a portafilter:
The
portafilter is not installed
correctly.
Below the portafilter cradle
, push the portafilter into
the grinder cavity until the grinder starts.
A severe problem occur-
red.
Get in contact with an authorized service centre for exa-
mination and repair.
The storage container does
not fit in the grinder cavity.
The storage container is in
wrong orientation.
When inserting the storage container, the filling hole in the
container lid must face to the rear wall of the grinder cavity.
A portafilter cradle is
installed.
Remove the portafilter cradle. Then try again.
The latch at the container
lid is still closed.
Open the black latch and turn it to the well in the contai-
ner lid. Then try again.
Ground coffee spills from
the storage container.
The powder tray is missing. Always install the powder tray, when grinding into the
storage container.
The storage container is
overfilled.
Before operation, always ensure that there is sufficient
free space left in the storage container. The build-up of
heaps in the storage container may cause overflow, even
when the container is not filled completely. We recom-
mend to empty the storage container completely, before
grinding another portion.
Electrostatic charge may
be the cause, especially,
when a very fine grind
size is selected.
This problem may occur with inclement weather and fine
grind size. The problem may be reduced, when wiping the
exterior
of the storage container via a slightly damp cloth.
Avoid wiping the collection container via any dry cloth made
of synthetics. For cleaning, prefer a cloth made of linen.
The usual amount is not
given off, and/or the
grinder makes an unusual
noise.
You changed the grind
size.
After changing the grind size, it may be necessary to
adapt the grind time accordingly (see: ‘Operation / Set-
ting the Amount’).
Not enough coffee beans
in the bean hopper.
Fill the bean hopper.
Problem
Mögliche Ursache
Die einfache Lösung
Coffee beans are wedged
in the bean hopper base
or grinder intake.
Unplug the appliance and remove the hopper lid. Careful-
ly stir the coffee beans in the bean hopper a little. Then
try again. Carefully turn the lock dial to and fro. If the
problem persists, remove the bean hopper. Then remove
the coffee beans from the grinder intake.
The grinder got blocked
during operation.
Unplug the appliance and remove the blockage (see: ‘Ope-
ration / Removing Blockages’).
CAUTION:
Do not poke in
the openings of the grinder (bean hopper base or powder
outlet). You cannot remove the blockage this way!
You cannot unlock the bean
hopper. The lock dial does
not turn.
A coffee bean is jam-
med at the bean hopper
base, blocking the closing
mechanism.
Without violence
, turn the lock dial to and fro a little to
get the coffee bean out of the closing mechanism. If the
problem persists, prepare the appliance for operation and
let the grinder work for a moment. Then try again.
CARE AND CLEANING
WARNING
–
Always ensure that the appliance and all its parts and
accessories are out of reach of young children and animals.
Always unplug the
appliance, before moving and/or cleaning the appliance. Do not disassemble or
assemble any parts, while the appliance is connected to the power supply.
The grinding tools in the grinder chamber are edged. Touch the grinding tools with
care.
To avoid hazards due to electric shock and damage:
Do not clean the appliance
in an automatic dishwasher!
Do not immerse the housing, grinding sleeve, power
plug, or power cord in any liquid,. Do not spill or drip any liquids on the housing,
power cord, or in the grinder chamber or in the mounted bean hopper. To protect
yourself from electric shock, do not touch the housing or the power cord with wet
hands, while the appliance is connected to the power supply.
Do not use violence. Do not use any abrasive cleaners or cleaning pads (e.g. metal
scouring pads) for cleaning the appliance or any part of it, to avoid damage to the
surfaces. For cleaning the grinder chamber, do not use any hard or sharp-edged
foreign objects. Only use a completely dry brush (provided cleaning brush or ano-
ther small nylon brush) for cleaning the grinder chamber. Always keep the grinder
chamber completely dry.
Hygienic cleaning is performed according to the following instructions.
