10
11
When liquids are spilled on the motor housing, immediately unplug the appliance and
dry the motor housing to avoid risk of electric shock or fire.
Do not
attempt to operate
the appliance, when liquids are on or in the motor housing. Take the appliance to an
authorised service centre for examination and repair.
1. Measure the desired quantity of whole coffee beans or spices directly into the Coffee
Bean Container and cover with lid.
ATTENTION:
Ensure the Coffee Bean Container is locked securely in position before
you fill in the coffee beans. The bottom of the Coffee Bean Container is open. Lifting the
Coffee Bean Container the content falls out.
WARNING:
Do not overfill the Coffee Bean Container. Pay attention to the
›MAX‹ mark on the Coffee Bean Container.
WARNING:
If the coffee bean container is positi-
oned on the motorblock, and the plug is connected to the
power outlet, do not insert your fingers, a wooden or
plastic spoon or similar cooking utensils or foreign sub-
stances in the Coffee Bean Container.
2. Turn the Power ON-/OFF-switch to on (›I‹).
3. Rotate the Timer Selector Dial to select the desired grinding time.
Note:
The grinding time depends on the type of coffee beans, amount of coffee, fineness of
grind and your personal flavour preferences.
Rotate the Timer Selector Dial clockwise to the desired time and press the
start-/stop-button on the front of the Grinder Base to begin grinding. The Cof-
fee Grinder will begin grinding the coffee or spices directly into the Ground
Coffee Container and will stop automatically when grinding is complete. To
stop grinding cycle at any time, push the start-/stop-button again. If you press the start-/
stop-button again, the grinder will start from the beginning of timed cycle.
Note:
You can also stop the grinding cycle turning the Power ON-/OFF-switch to ›O‹ or
rotating the Timer Selector Dial completely counterclockwise.
Note:
Always turn the appliance off ›O‹ and wait for the motor to stop moving before refilling
the Coffee Bean Container or taking off the lid. Only refill the Coffee Bean Container
when the Coffee Bean Container is securely locked on the motor housing.
IMPORTANT:
Do not forget to empty the Coffee Container from time to time when
grinding coffee beans.
ATTENTION:
Do not operate this appliance for longer than 2 minutes at a time as this
could cause overheating. Allow to cool for at least 2 minutes after each use. Allow appli-
ance to cool down for 10-15 minutes after long operation.
ATTENTION:
Only take the Coffee Bean Container of the motor housing when it is
completely empty. The bottom of the Coffee Bean Container is open. Lifting the Coffee
Bean Container the content falls out.
4. As soon as the Grinding Gear stopped you can take out the content of the Coffee
Container.
ATTENTION:
Do not use force when the Grinding Gear stocks or stalls. Foreign sub-
stance might be wedged in the Grinding Gear. Turn the appliance OFF ›O‹, unplug the
appliance and clean the appliance according to the instructions ›Care and Cleaning‹.
Try to put the appliance back to operation. If the Grinding Gear is still not running take
the appliance for technical maintenance and repair to an authorised specialised repa-
ration shop.
5. Turn the appliance OFF ›O‹, wait until the motor stops and unplug the appliance
before assembling/disassembling or storing.
GRIND SELECTOR CONTROL
With the different settings on the Grinding Gear you have influence on the coffee you
will get. You can choose the desired fineness of grind on the Coffee Bean Container.
You will find the grind selection following:
Coarse - Percolator:
Fineness: coarse grained - for coffee in a percolator
Medium - Plunger:
Fineness: medium grained - for coffee in a plunger
Fine - Filter:
Fineness: fine grained- for filter coffee, espresso, latte machiatto, cappuccino.
Choose the finest setting for turkish coffee.
ATTENTION: If the Coffee Bean Container is filled with coffee beans you
can only change the Grinding Selector setting while the motor is running!
