23
6. Your kettle will illuminate during the boiling process from blue (cold) to red (boiling). The
stages of illumination are a progress indicator, to see what stage your kettle is in. The dis-
play will start off displaying LO but as the temperature of the water rises above 40 degrees,
it will display the actual water temperature.
NOTE:
The displayed temperature can /- 5-8 degrees.
You can interrupt the boiling process at any time by pressing the ON/OFF button or
removing the kettle from the power base.
Colour
bright blue
dark blue
pink
red
Temperature up to 50 °C
60 °C
70 °C
85 °C and higher
7. When the water is boiling, the interior illumination will turn dark red and a beep sounds.
The kettle will switch off automatically after a few seconds and the illumination of the kettle
will go out. After allowing the kettle to cool down for 15–20 seconds, the water can be
brought back to a boil by pressing the ON/OFF button again.
NOTE:
Boiling can be interrupted or cancelled at any time simply by pressing the boil
button or lifting the kettle from the power base.
Important:
We recommend turning the kettle off by pressing the ON/OFF button before
removing the kettle from the power base.
8. If you do not wish to reboil the water, unplug the power base.
9. To pour the water, lift the kettle from the power base and pour.
NOTE:
Use caution when pouring boiling water from the kettle. Do not pour the water too
quickly, as boiling water could splash.
Important:
Do not leave remaining water cool down to room temperature in the kettle to
avoid any excessive accumulation of mineral deposits on the interior of the water container
and water level indicator.
The kettle may be stored on its power base, when not in use to protect the connector pins
from dust and splashes.
WARNING: Always switch OFF the kettle and unplug from power supply,
when the kettle is not in use, to avoid risk of fire and electric shock. DO NOT
leave the power base unattended with the power plug connected to the
power supply.
KEEP WARM Mode
You may wish for your kettle to hold at a desired temperature for a period
of time.
1. First, you should heat up the water until it boils, as described in the instructions
above.
2. After the water has boiled, select the desired temperature by pressing the
temperature select/KEEP WARM button (picture A) until the red dot on the
display is lined up with the desired temperature (picture B). The KEEP WARM
A
B
42420_WasserkocherColourVision_Manual_Okt2008.qxp 09.12.2008 15:48 Seite 23
