EN
EN
8
9
may not be used again to avoid overheating an fire. Do not touch the
appliance or power plug with wet hands, while the appliance is live.
• Always wipe off spilled liquids immediately. Do not operate or place the
appliance on wet, inclined, or uneven surfaces or on metal surfaces (e.g.
sink) or in a tablet or tub. Do not place or immerse the power base or
kettle in any liquids or let liquids run onto the power base or exterior of
the kettle. Always ensure that the working surface and power base are
completely dry, before connecting the power base to the power supply.
• Always remove the kettle from the base for filling or pouring.
• Before placing the kettle onto the power base, always ensure that
the exterior of the kettle is absolutely dry. When liquids run out duri-
ng operation, or accumulate under the power base, do not touch the
appliance, but immediately unplug the appliance. Thereafter, clean
the appliance and let it dry naturally for at least 1 day (see: 'Care and
Cleaning'). If in doubt, check the kettle for leakage.
•
Do not place any parts of the appliance into an automatic dishwasher.
HIGH TEMPERATURE – RISK OF BURNS
The Design Water Kettle Pour Over Advanced is an electrically heated
water kettle and equipped with an electric heating plate for heating drin-
king water at the maximum to the boil. Therefore, on improper use, the
appliance may cause severe burns, scalds and damage.
• During operation, even with the lid closed properly, hot steam could
escape via the steam vents on top of the kettle, and splashes of hot
water may escape from the spout. To avoid scalds due to steam and
splashes: do not hold your face or other parts of your body over,
under, or directly near the appliance during operation or during pou-
ring and while the appliance is still hot. Do not block the steam vents!
• Even the exterior of the appliance may be very hot during operation
and some time thereafter. Only touch the kettle at the handles (kettle
and lid), when it may be hot. Before pouring, wait until the water has
stopped boiling.
DO NOT turn the kettle upside down for pouring!
Otherwise, the lid may fall off with hot water shooting out. Pour care-
fully to avoid spilling. Always keep the lid closed during operation
and when the water is boiling or is very hot still, to avoid scalding.
• Always leave the appliance cool down to room temperature and
empty the kettle completely, before cleaning or storing the appliance.
• Do not hold your hands or any foreign objects into the kettle, while the
kettle is placed on the power base and/or may be still hot.
•
The appliance is NO temperature measuring device.
The accuracy of the
displayed temperature is adapted to its intended use for heating water and
not suited for special purpose (e.g. preparing drinks for invalid persons or
babies). Always check the temperature before feeding and/or consuming.
TECHNICAL SPECIFICATIONS
Model:
Item No.: 42329 Design Water Kettle Pour Over Advanced
Power supply:
220 - 240 V ~, 50 - 60 Hz, at least 16 A
Maximum power consumption:
1200 W
Length of power cord:
approx. 75 cm (29 inch)
Weight:
approx. 1.45 kg
Dimensions:
Kettle: approx.290 mm x 150 mm x 180 mm
Base: approx.190 mm x 210 mm x 45 mm
(width x depth x height)
Capacity:
min.: 0.2 litres (200 ml)
max.: 1.0 litre (1000 ml)
Temperature range:
40 - 100 °C (104 - 210 °F)
Time until automatic shut-off:
without keep warm function: max. 6.5 minutes
keep warm function: approx. 2 hours
Certification:
NOTE
As a result of continuous improvements, the design and specifications of the product
may differ slightly to the unit illustrated on the packaging.
These specifications may change without notice.
