57
57
„Preparing the Appliance“)
Place the bowl on the motor base. For storage, it is quite sufficient to lock the bowl only until
it engages firmly on the motor base and will not fall. This way, you avoid excessive wear to
the safety interlocks.
Insert the long shaft in the container, and place the chopping blade on it without pushing it
down. There is no need to fix it on the shaft.
Then, place the short shaft carefully in the container, and put the emulsifying disc on it. Insert
the separator disc.
Place the large lid on the container. Again, the lid is already firmly in place without locking
the safety interlock completely. Put the pusher into the feed tube.
3. You can store some tools in the drawer of the motor base, to avoid injuries due to tou-
ching it unintentionally.
Carefully push the drawer back into the motor base.
CAUTION:
Do not grasp the appliance by the bowl, power cord or lid for moving the appli-
ance. To move the appliance, always grasp the motor base at both sides near the bottom.
4. Grasp the motor base with both hands at its sides, and place it on a suitable surface,
where it can not fall, and is
out of reach of young children
.
5. The regular lid and food collector should be stored near the appliance.
6. It is best to store the adjustable slicing disc and lid of the small bowl near the appliance.
7. Wind the power cord loosely around the motor base.
Notes for disposal
Dispose of the appliance and packaging must be effected in accordance with the corres-
ponding local regulations and requirements for electrical appliances and packaging. Please
contact your local disposal company.
Information and service
Please check www.gastroback.de for further information. For technical support, please con-
tact Gastroback Customer Care Center by phone: +49 (0)4165/22 25-0 or e-mail
Warranty
We guarantee that all our products are free of defects at the time of purchase.
Any demonstrable manufacturing or material defects will be to the exclusion of any further
claim and within warranty limits of the law free of charge repaired or substituted. There is
no warranty claim of the purchaser if the damage or defect of the appliance is caused by
inappropriate treatment, over loading or installation mistakes. The warranty claim expires if
there is any technical interference of a third party without an written agreement.
The purchaser has to present the sales slip in assertion-of-claim and has to bear all charges
of costs and risk of the transport.
Summary of Contents for 40963 DesignFood Processor S
Page 27: ......
