6.3
OPERATING MODE SELECTION
HEATING MODE SELECTION :
Press the appropriate button to select between
different heating modes:
Auto : Boiler will be operated according to adjusted
time program.
Comfort Temperature : Boiler will be operated
according
to
adjusted
comfort
temperature
permenantly.
Reduced Temperature : Boiler will be operated
according
to
adjusted
reduced
temperature
permenantly.
Standby : Heating will be turned off, but frost
protection still activated unless the power supply is
disconnected.
DHW MODE SEELECTION :
When the corresponding button is used, the boiler is
switched on to operate synchronously with the units
that produce hot water (DHW tank, plate heat
exchanger, etc.). This function can be switched off or
on.
Pressing the button once will be activate the boiler
to heat the DHW tank. Pressing it again disables
DHW tank heating. Pressing the button for 3 seconds
activates the Quick Water Heating Mode for faster
hot water production.
ADJUSTING THE ROOM TEMPERATURE :
Turn the setting knob to change the comfort
temperature and push the OK button to set the
temperature.
REDUCED TEMPERATURE : It is a defined lower
temperature limit so that the room temperature
does not fall below a certain degree. Adjusting this
value too high can cause unnecessary operation of
the boiler.
33
WALLCON X-treme 115-125-150
