Gaspardo XPI 800, Use And Maintenance / Spare Parts

Page: 43 / 64

USE AND MAINTENANCE
43
ENGLISH
cod. 19502250
g
11.0 DIAGRAMS AND SPREADING TABLES: HOW
TO SET THE SPREADER
The diagrams and the spreading tables are printed on the
following pages. To set the spreader, follow the instructions
below:
1) chose the spreading width (12-18-24-28-32-36 metres).
2) chose from the table below the type of fertilizer (or similar
types). The numbers 1-2-3-4-5-6 etc. indicate the type of
fertilizer and are printed in the spreading tables for reference.
3) according to the tractor speed and the type of fertilizer to be
spread, chose from the tables the position of the flow control
lever.
Pay close attention to the spreader height from the ground (4)
and do not exceed the indicated revolution number (5).
12.0 HOW TO VARY THE SPREADING WIDTH AND
DENSITY
We remind you that, to get a uniform spreading, it is necessary
to use fertilizers with regular particle sizes. I valori possono
The results may vary considerably according to the weather
conditions during the spreading; wind and uneven ground may
affect the spreading uniformity.
Our tests have been carried out in good weather conditions, in
an even field and making use of fertilizers with regular particle
sizes. Before spreading the fertilizer, it is advisable to test the
flow rate. If the settings indicated in the tables need to be varied,
it is necessary to know that:
1) To increase the spreading width, move
the arrow towards the sign (-) (for example
from 24 to 28 to 32 metres etc.), to reduce
the spreading width, move the arrow
towards the sign (+).
RADIAL SHIFT
increase
reduce