5
4
IMPORTANT
• Do not smoke when attempting to ignite
the barbecue.
• Never use volcanic rock, heatbeads or
other material.
• Always use protective gloves when handling
hot components.
•
Note:
If for some reason, ignitor fails to
produce a spark at the electrode, barbecue
can be lit by a long barbecue match. With
hood open insert lighted match into match
lighting hole positioned on the side of the
BBQ body. Push and turn a control knob to
‘HIGH’. Burner ignition can be checked
through this hole.
• Never use the side burner with the lid in the
closed position. Never attempt to the light
the side burner with a pot over the burner.
Light the burner first ,and then place the pot
over the burner.
• DO NOT USE THE ROTISSERIE BURNER
WHEN MAIN BURNERS ARE IN OPERATION.
Problem: Burner will not ignite
Possible Reason
Solution
Valve on cylinder is closed Open valve on cylinder
Control knob is off
Turn knob to high when
lighting
Igniter is faulty
Use a long barbecue
match
Ignition system check
5. Adjust the heat by turning the knob to the High/
Low position.
6. To turn the barbecue ‘OFF’, turn the cylinder
valve to the ‘OFF’ position and then turn all of
the control knobs on the appliance clockwise to
the ‘OFF’ position.
If the rotisserie back burner fails to remain alight or the
flame pattern is disturbed, ensure it is not facing into a
direct wind. Re-position the direction of the BBQ, wait 5
minutes, and try the lighting procedure again.
Before cooking for the first time, operate the barbecue for
about 15 minutes with the lid closed and the gas turned
on HIGH. This will “heat clean” the internal parts.
