background image

 

Technical Specifications 

 

MODEL NO.:  

HF1814A 

DESCRIPTION:  

OUTDOOR GAS BARBECUE GRILL 

TOTAL HEAT INPUT: 
(ALL APPLIANCE 
CATEGORIES) 

    3.2kW(232.7g/h) 

 

 

APPLIANCE CATEGORY: 

□I

3+(28-30/37)                              

 

□I

3B/P(30)         

 

□I

3B/P(50)    

 

□I

3B/P(37)             

 

TYPES OF GAS: 

BUTANE 

PROPANE 

BUTANE, PROPANE OR THEIR MIXTURES 

GAS PRESSURE: 

28-30 mbar 

37 mbar 

30 mbar 

50mbar 

37 mbar 

INJECTOR SIZE main:  

0.86mm 

0.86mm 

0.75mm 

0.83mm 

DATE CODE:  

 

USE OUTDOORS ONLY. 

READ THE INSTRUCTIONS BEFORE USING THE APPLIANCE. 
WARNING: ACCESSIBLE PARTS MAY BE VERY HOT. KEEP YOUNG CHILDREN AWAY. 
THIS APPLIANCE MUST BE KEPT AWAY FROM FLAMMABLE MATERIALS DURING USE. DO NOT MOVE 
THE APPLIANCE DURING USE.

  

TURN OFF THE LPG GAS SUPPLY AT THE LPG CYLINDER AFTER USE.  
DO NOT MODIFY THE APPLIANCE.

 

Country of Destination: 

I

3+(28-30/37)

BE, CH, CY, CZ, ES, FR, GB, GR, IE, IT, LT, LU, LV, PT, SK, SI,TR  

I

3B/P(30)

 CY, DK, EE, FI, HU, IT, LT, NL, NO, SE, SI, SK, RO, HR, TR, BG, IS, LU, MT, CZ,GR,LV 

I

3B/P(50)

AT, CH, DE, SK, CZ 

I

3B/P(37)

PL

 

Produced by Guangzhou Hengfu Hardware Technology CO,.LTD 
Address: No. 1 Qinglong Street, Dalongtou Village, Jianggao Town, Baiyun District, Guangzhou

 

 

Note: The digits on the injector indicating the injector size, for example, “0.86” means the injector size is 0.86mm. 
The flexible hose used should be approved by EN16436-1:2014 with the maximum length 1.5m; 
A regulator complied with EN16129:2013 and the national regulation should be used on the appliance. 
Use 30mbar regulator for butane/propane under the category I3B/P(30). 
Use 30mbar regulator for butane under the category I3+(28-30/37). 
Use 37mbar regulator for propane under the category I3+(28-30/37). 
Use 37mbar regulator for butane/propane under the category I3B/P(50). 
Use 50mbar regulator for butane/propane under the category I3B/P(50). 

 
 
 

For Your Safety 

 

IMPORTANT NOTICE: READ ALL INSTRUCTIONS PRIOR TO ASSEMBLY AND USE. 

 

Safety First!

 

Read and understand all warnings and precautions prior to operating your grill. 
 

WARNING 

 

1.  LPG Cylinders must be stored outdoors out of the reach of children and must not be stored in a building, 

garage or any other enclosed area. 

2.  The use of alcohol, prescription or non-

prescription drugs may impair an individual’s ability to properly 

assemble or safely operate this appliance. 

0063-18 
PIN NO.0063CS7068 

Summary of Contents for HF1814A






















Reviews: