background image

•  READ ALL INSTRUCTIONS.

•  DO NOT touch hot surfaces.  Use handles  

  or knobs.      

•   Close supervision is necessary when 

appliance is used by or near children.      

•   The use of accessory attachments 

not recommended by the appliance 

manufacturer may cause injuries.

•   Extreme caution must be used when 

moving an appliance containing hot oil or 

other hot liquids.

•  DO NOT use this appliance for anything other  

  than intended use.

•  Model GRT2 - the motor is DC 3V 

  (Battery Size “D”).

•  Model GRT3 & GRT4 - the motor is AC 240V

•   If 

using with a barbecue fitted with a side 

burner, do not use the side burner while the 

rotisserie motor is fitted to the same side.  It 

is recommended to fit the rotisserie motor on 

the opposite side to the side burner.

•   DO NOT place on or near a hot gas or electric 

burner, or in a heated oven.

IMPORTANT SAFEGUARDS - Model GRT2 & GRT3 

 

When using electrical appliances, basic safety precautions should always be followed, including the 

following:

IMPORTANT SAFEGUARDS - Model. No GRT3 & GRT4

•   The power supply must be supplied through a residual current device (RCD) having 

a tripping current not exceeding 30mA.

•   DO NOT use the rotisserie during inclement weather.
•   Unplug and remove rotisserie when not in use.
•   DO NOT operate the rotisserie with a damaged cord or plug, or if rotisserie 

malfunctions, or has been damaged in any manner.

•   To protect against electrical shock, DO NOT immerse cord, plug or motor in water or 

expose to rain.

•   Avoid contact of the electrical cord with hot barbecue surfaces and grease.

IMPORTANT SAFEGUARDS - Model. No GRT5

•   Ensure that the light is disconnected from the mains supply when not in use, before 

installing/changing globes, making changes and when changing accessories.

•   DO NOT change globes or clean the light lens while light is on or plugged into the 

mains power supply.

•   Always use the correct type of globe.
•   DO NOT use the light as a heater.
•   DO NOT use the light as a dryer.
•   DO NOT touch any part of the light while on. Hot surfaces may burn.
•   

Always keep light one (1m) from combustible materials or flammable gases.

•   Always use extension cords intended for and marked ‘outdoor’ use.

Summary of Contents for GRT2

Page 1: ... 240V Suits Gasmate and most barbecues with roasting hoods up to 6 burners 4 x 2 heavy duty prong forks 4 piece shaft Supplied with all mounting hardware Counterweight Model No GRT2 Operates on mains electricity The motor is AC 240V Suits Gasmate and most barbecues with roasting hoods 4 to 6 burners 4 x 2 stainless steel prong forks 4 piece stainless steel shaft Supplied with all mounting hardware...

Page 2: ...AFEGUARDS Model No GRT3 GRT4 The power supply must be supplied through a residual current device RCD having a tripping current not exceeding 30mA DO NOT use the rotisserie during inclement weather Unplug and remove rotisserie when not in use DO NOT operate the rotisserie with a damaged cord or plug or if rotisserie malfunctions or has been damaged in any manner To protect against electrical shock ...

Page 3: ...nboned Meat For meats which are unboned it is best to secure the rotisserie skewer diagonally through the meaty sections When to Use Foil If protuding bones or wings brown too quickly cover with pieces of foil SETTING UP THE BARBECUE When rotisserie cooking the majority of heat will come from an indirect souce In other words the burners at each end of the barbecue are lit and the food is placed ce...

Page 4: ...ded STEP 3 Screw the threaded ends of the motor rod 13 spit extension rod 12 if needed and spit rod halves 5 6 together Tighten firmly with wrenches Slide skewers 7 on each end of spit rods 5 6 and tighten the thumbscrews Slide on the collar with thumbscrew 8 shaft bush 9 and tighten The shaft spacer 15 may be required if the collar with thumbscrew interferes with the barbecue body Screw the handl...

Reviews: