Gasmate GM160-014, Manual

Page: 14 / 20

14 15
ASSEMBLY INSTRUCTIONS
Step 13
Attach the regulator to your gas
cylinder.
Step 14
Turn on the gas cylinder
ensuring that all of the controls
on the Pizza Oven are turned
OFF at this point. DO NOT
ATTEMPT TO LIGHT THE
PIZZA OVEN!!.
Step 12
Offer the hose assembly up to
the connection point on the
Pizza Oven. Tighten the
connection nut clockwise with
your fingers until it is finger
tight. Using an adjustable
crescent (spanner) tighten the
nut by approximately ¼ of
a full turn.
Step 15
Use a solution of soapy water
(dishwashing liquid and water
is fine). Brush it on or use a
spray bottle as shown in the
drawing. Ensure the connections
have a good coating.
Step 16a
If the connection is leaking,
bubbles will start to grow in the
soapy solution. If this happens
shut off the gas supply at the
cylinder.
Step 16b
Retighten the connections using
an adjustable crescent (spanner)
then repeat steps 14 - 15.
Step 16c
The connection is gas tight
when no bubbles grow around
the gas connection.