background image

2

 WARNING

Read these instructions for use carefully. 
Familiarise yourself with the appliance before 
connecting it to its gas container. Keep these 
instructions for future reference. 

DO NOT OPERATE THIS APPLIANCE BEFORE 
READING THE INSTRUCTION BOOKLET.
DO NOT PLACE ARTICLES ON OR AGAINST  
THIS APPLIANCE.
DO NOT PLACE CHEMICALS OR FLAMMABLE 
MATERIALS, OR SPRAY AEROSOLS NEAR  
THIS APPLIANCE.
DO NOT OPERATE WITH PANELS, COVERS OR 
GUARDS REMOVED FROM THIS APPLIANCE.
DO NOT OPERATE IN AN ENCLOSED AREA 
WITHOUT VENTILATION.
DO NOT OPERATE IN A BOAT, CARAVAN  
OR TENT.

•  This appliance shall only be connected  

to a Propane/ULP gas cylinder with a LCC27/
QCC cylinder valve certified to AS2469 
standards.

•  It maybe hazardous to attempt to fit other types 

of gas containers or cartridges.

•  This appliance shall only be used with the  

Hose and Regulator Assembly supplied, 
Regulator is set to 2.75kPa and is not adjustable 
– Do Not Modify.

•  This appliance is designed for outdoor use  

only and must be operated away from any 
flammable material or surfaces and materials.

•  This appliance is to be stored in a dry and  

well-ventilated location free from direct sunlight.

•  Do not store when appliance is still connected 

to the cylinder.

•  Make sure that the cylinder is disconnected 

and is stored in a well-ventilated area, free from 
direct sunlight, heat and ignition sources.

•  If being stored indoors, ensure that the location 

complies with the standard AS/NZS1596.

•  This appliance must only be serviced  

by an authorised service agent, contact  
SITRO Group for assistance with repairs  
and spare parts.

GENERAL WARNINGS

 DANGER

•  During operation all surfaces will be extremely 

hot and should not be touched or handled.

•  Do not use the appliance if it is leaking, 

damaged or does not operate properly.

•  This appliance must only be serviced  

by an authorized person.

•  Handle with care even after brief use, always 

pick up using the body not the cylinder.

•  It may be hazardous to attempt to fit other types 

of gas containers or cartridges.

•  Use only in well ventilated areas.
•  Always operate appliance a minimum of 900mm 

from flammable materials, walls and 900mm 
from the ceiling.

•  Do not modify appliance to fit other connectors 

or cylinders.

•  Only use the hose assembly as supplied with 

this appliance for connection to the cylinder  
– DO NOT USE ADAPTORS.

•  Avoid twisting or kinking the flexible hose.
•  Do not modify this appliance.
•  Do not use multiple appliances to heat a single 

utensil.

•  Children must be supervised by an adult 

at all times.

•  Never leave appliance unattended  

when operating.

•  Use as a cooking appliance only, not to be used 

as heater or modified for any other reason.

•  Avoid boil over and spills on to burners.

 CARBON MONOXIDE HAZARD

•  Using this appliance in an enclosed space  

may cause DEATH. Do not use in caravans, 
tents, marine craft, cars, mobile homes or 
similar locations.

•  ONLY USE IN WELL VENTILATED AREAS

Summary of Contents for CS2134SL













Reviews: