Burner head
assembly
Flexible hose
assembly
Handle
M5 screw 10mm long
M5 nuts
Cylinder
house body
Cylinder
house door
Lock
M6 screw 15mm long
M6 nuts
Base
AREA HEATER ASSEMBLY
Tools Required:
Phillips head screwdriver
2 adjustable spanners
Step 1.
Secure the base to the cylinder house body
with ten M6 x 15mm long screws, washers
and nuts and the wheels with three
M6 x 15mm long screws, washers and nuts.
Step 2.
Secure the burner head to inside of the
cylinder house body with four M5 x 10mm
long screws, washers and nuts. Positioning
the handle around the control knob and
securing with two M5 x 10mm long screws,
washer and nuts.
Step 3.
Securely attach the hose to the burner
head and the regulator to a gas cylinder,
check the connections for leaks using a
soap solution.
Step 4.
Sit the cylinder house door into the hinge,
close and lock.
