6. Storage
a. After using, turn the gas container valve in a clockwise direction to the “off”
(close) position. The burner will continue to operate until all gas has been bled
from the hose and regulator assembly.
b. Wait for the flame to go out, after that to turn the appliance control valve(s) off.
c. Disconnect the shower hose from the “water output”, allow all water to drain out
rom hosing before rolling up and storing away.
d. Disconnect the regulator and hose assembly from the appliance and gas
container and store away.
7.
Disconnecting from gas container
1. Check the appliance is fully extinguished, the gas container control valve is in
the fully “off” position and all surfaces are cool enough.
2. Loosen the connection to the gas container in a clockwise direction.
Daily Inspection & Maintenance
The appliance, gas pipes and hoses should be checked and maintained by an
authorized servicer every 6-12 months. If you find joints that are not tightly
secured or if there are cracks or corrosion anywhere, you should stop using the
appliance and perform the necessary maintenance immediately.
Caution
The appliance will still be hot shortly after use. Avoid draining off the residual
water until the water cools down, to avoid being scalded.
Users should regularly using the soapy water to wipe on connecting part of each
pipe to test whether has the gas leakage.
● Clean the accumulated dirt and dust on the casing of the appliance by cloth
regularly. Do not use chemical or volatile solvent.
● Use a neutral detergent to clean all surfaces and areas then wipe it dry. Taking
care not to allow water to enter the top vent.
● Before each use, check the stainless steel filter on the “Water input” pipe is in
place and clean if have any particles.
● Do not submerge the appliance in a sink or container.
● Do not use abrasive cleaners or bleach.
15