How To Use The Connector
1. Connector
For use with water input sources, such as 12V low voltage pump, please consult
the pump instruction manual or contact [email protected]
2. Preparation
a. Only use in well-ventilated areas. Carbon moxoxide hazard-using this
appliance in an inclosed space will cause death-do not use in caravans, tents,
marine craft, cars, mobile homes or similar locations.
b. Find a suitable sturdy, non-combustible vertical surface to hang the
appliance on. The surface should be at least 1000mm clear from the sides and
1000mm from the top of all combustible surfaces, fabrics, flammable materials,
and people.
c. Use ULPG gas only.
d. Open carton box (Picture 1) and remove appliance from the box and remove all
transit material such as the plastic, foam and plastic connection end caps
(Picture 2 & 3). Hang the appliance on a suitable vertical surface by the handle
attached to the back cover of the appliance or handing kit (Picture 4).
Gas Inlet Connector
BSP1/2''-5/8''-18UNF Male
Water Inlet Connector
BSP1/2”-Ø9.5mm Male
Water Outlet Connector
BSP1/2”-Ø9.5mm Male
Picture 1
Picture 2
Picture 3
Picture 4
11