Installation
5.4 Installing Options
Page 46
MDE-5411A ForeHB Islander Prime Installation Manual · October 2018
To install an HID Reader in the Islander Prime, proceed as follows:
1
Remove the screws affixing the HID Bracket to the Islander Prime pole door.
2
Remove the back plate from the HID Reader.
3
Fasten the HID Reader back plate to the HID Bracket using the flat head screws provided in
the installation kit as follows (see
Figure 27: HID Reader Back Plate
4
Pull the HID connector harness cable through the HID bracket, and mount the HID Reader to
the bracket as follows (see
Figure 28: HID Reader on Back Plate