MDE-5411A ForeHB Islander Prime Installation Manual · October 2018
Page 37
5.1 General
Installation
5 – Installation
5.1 General
This section provides the installation procedures for Islander Prime. These procedures include:
•
•
5.3 Installing the Pedestal Base
•
•
5.5 Installing Communication Interfaces
•
5.6 Post-Installation Checklist
on
•
on
5.2 Installation Guidelines
Installation procedures and requirements depend on the specific fuel dispenser models and the
site layout. Therefore, use the information in this section to develop installation plans for each
specific installation. Since installation requirements vary from case to case, no installation
hardware is supplied by the equipment manufacturer, and installation planners must develop
their own requirements.
The customer should provide an installation plan, designed by an authorized engineer. This
plan design should reflect the existing electric infrastructure of the site.
5.2.1 Precautions and Safety Notes
Prior to actual installation activities, carefully observe the precautions and safety notes
detailed in Precautions and Safety Notes and Requirements.
5.2.2 Safety Distances
The following shows the safety distances required for the installation of Islander Prime
adjacent to the dispensers (see
).
Figure 17: Base Plate Dimensions