A
B
31
After dismantling and
assembling the clutch drive
circuit, the remaining air
can be removed through the bleed
nipple.
TXT Pro 2004 -
18
-
&
(B) To check the oil level, set the
motorbike upright. If the bike has just
been used, leave it steady for some
minutes. Check the oil level in the window situated
low on the right side of the engine. The oil level must
be between the minimum and maximum indicators.
If it is too high, remove the excess; if it is too low, add
the necessary oil through the oil filler plug. Use the
same type and make of oil as the one already inside
the engine.
&
(A) The circle indicates
where the water pump
draining plug is.
&
32
Summary of Contents for TXT PRO - 2004
Page 30: ......
