GAS GAS SM 2008, User Manual

Page: 63 / 74

Selecting the danger rpm
When the set rpm is reached,
the right-hand warning LED
flashes to show that the rpm on
the engine are too high.
Default value: 10000 rpm
Enter the value by pressing
button 1 in succession. To go on
to the next digit, press button 3.
Confirm by pressing button 2.
Resetting the display functions after each use of the vehicle.
After each use of the vehicle, the following functions can be reset
simultaneously:
- Maximum speed
- Distance
- Chronometer
- Maximum temperature
- Maximum rpm
Confirm the reset by pressing buttons 1 and 2 simultaneously.
Total reset of the display
Press the RESET button, using a suitable object. The display will
start from zero, except for the data for total accumulated distance
and time.
Internal battery
The display is powered by an internal 3 V battery, type CR2032.
When the voltage in the internal battery drops below 2.45V, the
screen displays LO.
To change the battery, open the cover behind the display, and use
a coin to unscrew it counter-clockwise. Make sure that the positive
terminal on the battery is facing upward.
-
61
-