GAS GAS SM 2008, User Manual

Page: 61 / 74

- 59 -
Setting the time
Enter the value for the time by
pressing button 1 in succession.
To go on to the next digit, press
button 3.
Confirm by pressing button 2.
Setting the pulse per
revolution (PPR)
Note:
This step is only to be taken on
vehicles that change the type of
PPR pulse at a specific number
of rpm.
If you do not know this value,
press button 2 to go on to the
next screen.
Enter the value by pressing
button 1 in succession. To go on
to the next digit, press button 3.
Confirm by pressing button 2.
Setting the pulse per
revolution (PPR)
The gauge receives one
electrical pulse for each
revolution on the engine (PPR).
Default value for 2 and 4 stroke
engines: 1 PPR.
Enter the value by pressing
button 1 in succession. To go on
to the next digit, press button 3.
Confirm by pressing button 2.
Setting the pulse per revolution
(PPR)
Note:
This step is only to be taken if a
value of 0 was entered in the
previous step.
Default value: 1.0
If you do not know this value,
press button 2 to go on to the
next screen.
Enter the value by pressing button
1 in succession. To go on to the
next digit, press button 3.
Confirm by pressing button 2.