-29-
Cleaning
Clean the motorcycle regularly.
We recommend using warm water with ordinary
detergent and a sponge. More resistant dirt may be
removed with a gentle jet of water.
Warning!
Never clean the motorcycle with a high pressure
cleaner or strong jet of water. The water may enter
electrical components, bearings, carburettor, etc.
resulting in their premature wear.
- Use ordinary household detergent for cleaning the
motorcycle. For more resistant dirt remove with a
brush.
- To prevent water penetration, cover the exhaust pipe
before washing the cycle.
- After rinsing, dry the motorcycle with compressed air
and a cloth. Then go for a short ride on the motorcycle
to allow the engine to reach its normal operating
temperature and also activate the brakes. This ensures
total evaporation of any water from the more
inaccessible points.
- Remove the protective rubber covers on the
controls to allow any water to evaporate from within.
- When the motorcycle has cooled, moving parts and
bearings should be greased. Lubricate the chain with
special spray.
- To prevent faults in the electrical system use a
moisture-displacing spray on the short-circuit switch.
CLEANING AND STORAGE
Summary of Contents for MC65 - 2006
