TUNING THE ENGINE 16
107
16.6
Checking the basic position of the shift lever
Info
When driving, the shift lever must not touch the rider's boot when in the basic position.
When the shift lever keeps touching the boot, the transmission will be subject to an excessive load.
400692-10
–
Sit on the vehicle in the riding position and determine distance
A
between the upper edge of your boot and the shift lever.
Distance between shift lever
and upper edge of boot
10 … 20 mm (0.39 … 0.79 in)
» If the distance does not meet specifications:
–
Adjust the basic position of the shift lever.
16.7
Adjusting the basic position of the shift lever
401950-12
–
Remove screw
1
with the washers and take off shift lever
2
.
401951-10
–
Clean gear teeth
A
of the shift lever and shift shaft.
–
Mount the shift lever on the shift shaft in the required position and
engage gearing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other
vehicle components during the shift procedure.
–
Mount and tighten screw
1
with washers.
Guideline
Screw, shift lever
M6
14 Nm (10.3 lbf ft)
Loctite
®
243™
Summary of Contents for MC 350F 2023
Page 1: ...OWNER S MANUAL 2023 MC 350F EX 350F Art no 3215099en...
Page 2: ......
