COOLING SYSTEM 15
85
Condition
The engine is cold.
E01391-10
–
Position the motorcycle upright.
–
Place an appropriate container under the water pump cover.
–
Remove radiator cap screw
1
.
–
Remove screw
2
.
–
Completely drain the coolant.
–
Mount and tighten screw
2
with a new seal ring.
Guideline
Coolant drain plug
M6
10 Nm (7.4 lbf ft)
–
Completely fill the radiator with coolant and mount and tighten radi-
ator cap screw
1
.
Coolant (
Danger
Danger of poisoning
Exhaust gases are toxic and inhaling
them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation when
running the engine.
–
Use effective exhaust extraction when starting or run-
ning the engine in an enclosed space.
–
Allow the engine to warm up and cool down again.
–
Check the antifreeze and coolant level. (
