COOLING SYSTEM 15
83
400243-10
–
Check the coolant level in the radiator.
Coolant level
A
above the
radiator fins
5 mm (0.2 in)
» If the coolant level does not match the specified value:
–
Correct the coolant level.
–
Mount and tighten radiator cap screw
1
.
15.3
Draining the coolant
Warning
Danger of scalding
During motorcycle operation, the coolant gets very hot and is under pressure.
–
Do not open the radiator, the radiator hoses or other cooling system components if the engine or the cooling
system are at operating temperature.
–
Allow the cooling system and the engine to cool down before you open the radiator, the radiator hoses or
other components of the cooling system.
–
In the event of scalding, rinse the area affected immediately with lukewarm water.
Warning
Danger of poisoning
Coolant is toxic and a health hazard.
–
Keep coolant out of the reach of children.
–
Do not allow coolant to come into contact with the skin, the eyes and clothing.
–
Consult a doctor immediately if coolant is swallowed.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
–
Change clothing if coolant spills onto your clothing.
Condition
The engine is cold.
E01391-10
–
Position the motorcycle upright.
–
Place an appropriate container under the water pump cover.
–
Remove radiator cap screw
1
.
–
Remove screw
2
.
–
Completely drain the coolant.
–
Mount and tighten screw
2
with a new seal ring.
Guideline
Coolant drain plug
M6
10 Nm (7.4 lbf ft)
