6 CONTROLS
16
Warning
Risk of injury
If the magnetic switch remains in the holder
during a fall, the vehicle is not immediately deactivated.
–
Make sure that the loop of the magnetic switch is securely
attached to the user’s protective clothing or wrist so that
the magnetic switch is disconnected from the holder in the
event of a fall.
If the red magnetic switch on the handlebar is disconnected from the
holder, e.g., in the event of a fall, the vehicle is deactivated.
By removing the red magnetic switch from the handlebar, the vehicle
can be quickly deactivated in any operating state.
The red magnetic switch on the handlebar cannot be replaced with the
gray magnetic switch under the seat
6.5
Magnetic switch under the seat
M01832-10
The holder for the gray magnetic switch
1
is located under the seat.
By removing the gray magnetic switch under the seat, you can prevent
the ride mode from being changed.
Locking the ride mode is recommended if you have not yet gained suffi-
cient experience for higher ride modes with more power and torque.
Possible states
• Magnetic switch
mounted under the seat
–
When the magnetic
switch is mounted under the seat, the ride mode can be changed.
• Magnetic switch
removed
–
When the magnetic switch under
the seat is removed, the ride mode cannot be changed.
The gray magnetic switch under the seat cannot be replaced with the
red magnetic switch on the handlebar
6.6
Foot brake lever
H03810-10
Foot brake lever
1
is located in front of the right footrest.
The rear brake is engaged with the foot brake lever.
6.7
Plug-in stand
402581-10
The fixture for plug-in stand
1
is located on the frame on the left side
of the vehicle.
The plug-in stand is used to park the motorcycle.
Info
Remove the plug-in stand before riding.