GAS GAS ENDURO 4T EC 2014, Owner'S Manual

Page: 41 / 77

Owner´s manual
-41-
3 1 2
Manutenzione
1
4
5
2 3
10.-EXHAUST SYSTEM
Exhaust and muffler reduces noise and lead gases away from the rider.
If the exhaust is damaged oxidized, beaten, or cracking, change it to a new one.
Change the silencer fiber if the noise is becoming too high or the engine perfor -
mance decreases.
Exhaust cleaning
For the cleaning of the exhaust pipe you must go to your GAS GAS official ser -
vice.
Muffler change
1. Remove the bolt (1,2) of the left fairing.
2. Remove the bolt of the muffler (3) and take out by pulling backwards.
3. Disengage the muffler (arrow) .
4. Change the muffler and reassembly all parts.
11.-MUFFLEER FIBER
The Muffler on your GAS GAS is a silencer of absorption. The absorbent element
is the silencer fiber. If you notice an increase in exhaust noise should proceed to
change the Muffler fiber.
Muffler fiber change
Once dismantled the silencer, (see “Muffler change”). Remove the 4 bolts (1).
1. Get out the muffler front end.
2. Remove the bolt (2)
3. Extract suppressor or DB Killer (3).
4. Change the muffler fiber (2) by wrapping it in the inner tube.
5. Insert the fiber around the exhaust pipe (3) in the rear of the silencer.
6. Reassembly all parts.
Maintenance
ProCarManuals.com