Workshop manual
-51-
SeRVICING aND RePaIRING THe eNGINe’S COmPONeNTS
21. Circlip D.25 t=2
22. Output sprocket Z13
23. Gear change seal collar
24. O-ring 25x2 NBR
25. Gear change bearing 6305
26. Gear change bearing 6203
27. Gear change bearing 6205ZC3E
28. Seal
29. Needle cage KD22X25X9.8
30. Circlip D.25
31. Complete gear change unit
1. Gear change washer 18x31.5x0.7
2. Primary 2nd sprocket
3. Circlip DIN 471
4. Grooved washer 31.5x1
5. Primary 6th sprocket
6. Primary 3rd and 4th sprocket
7. Washer 25.2x31.5x1
8. Primary 5th sprocket
9. Needle roller bearing K25-29-10
10. Primary 1st shaft
11. Secondary shaft
12. Circlip D.25 DIN
13. Secondary 2nd sprocket
14. Secondary 6th sprocket
15. Secondary 3rd sprocket
16. Secondary 4th sprocket
17. Secondary 5th sprocket
18. Washer 20.8x29x1
19. Needle roller bearing K20x24x10
20. Secondary 1st sprocket
Summary of Contents for Enduro 2T 200CC
