1
2
3
4
5
Engine Assembly
138
!
CRANKSHAFT
1) Crankshaft (RH)
2) Connecting rod
3) Bearing
4) Pin
5) Crankshaft (LH)
Define the width between crank webs by referring
to the figure during crankshaft reassembly.
DETAILS
Width between crank webs
Normal: 63 mm. 0.1 mm
When attaching the crankshaft to the crankcase,
use the special tools provided to pull from its LH
end towards the crankcase.
Tool Description:
crankshaft fitter
Tool Description:
adaptor
CAUTION!
Do not attach the crankshaft to the crankcase by
tapping it into position with a plastic hammer.
Always use the special tool provided, otherwise
the precision of the crankshaft alignment may be
impaired.
Engine Assembly
Assembly again the engine in the opposite
order of the disassembly.
Pay special attention to the following points:
CAUTION:
Before to assemble the engine, apply motor
oil to all the mobile pieces.
!
!
!
+
-
