GAS GAS EC 200, Workshop Manual

Page: 23 / 71

Engine
200 cc / 250 cc / 300 cc
EC ENDUCROSS WORKSHOP MANUAL
Ed: 07/05 DISMOUNTING ENGINE 03-07
Dismount the centrifugal operating system of the exhaust
valve
- Take the shaft and pinion off the water pump.
- Undo the screws -arrows- and remove the support -1- from
the exhaust valve control shaft.
- Remove the centrifugal mechanism from the exhaust valve
-2-.
Dismantling the starter pinion unit
- Dismount the spring -1- using pliers and remove the starter
pinion unit.
- Remove the circlip -2-, remove the spacer washer, and take
off the inner starter pinion.
Dismantling the gear selector unit
- Remove the complete selector rod -arrow- by pulling
outwards.
- Remove the selector rod bushing -arrow-.
1
2
1
2