Garudan GF-3131-447 MH, User Manual

Page: 8 / 64

© ANITA
MP03100EN_180912 8
3. BRIEF INTRODUCTION OF THE MACHINE
Direct drive heavy duty computer controlled top and bottom feed auto trimmer lockstitch machine
with single straight needle. It adopts link take-up to feed, link thread takes -up structure, rotating
hook to form stitch 301. The machine adopts the auto-lubrication oil pump. Free and smooth
operation, low noise, little vibration, applied to sewing leather, canvas, heavy duty decoration,
ribbon type fabric, such as bag, tents, sofa etc. It is precise with functions of computer-controlled
thread trimmer, needle stitch count and positioned.
4. INSTALLATION OF THE OIL TRAY

Insert the ani-vibration gasket (2) into front angle of the oil tray (1). See Fig.1.

Insert the ani-vibration gasket (3) two into behind angle of the oil tray (1).

Insert the oil tray (4) into the table groove horizontally.

Put the two cover chain bushes (5) into the table groove.
5. INSTALLATIONS OF THE KNEE CONTROL DEVICES
Insert the knee control block (1), hand bar and joint into the chains (2) then tighten the screws (3)
lightly. See Fig.2.
Figure 1
Figure 2
www.garudan.cz