Garudan GF-3131-447 MH, User Manual

Page: 19 / 64

© ANITA
MP03100EN_180912 19
27. BUTTON DISPLAY AND OPERATING INSTRUCTIONS
Name Key Indicate Icons
Start/End Back-
Tacking Selection
Execution starting back seam B segment or execution starting
back seam (A, B segment) 1 Execution starting back seam (A, B
segment) 2 times.
Execution terminates back seam C segment or execution
terminates back seam (C, D segment) 1 Execution terminates
back seam (C, D segment) 2 times.
Freedom sewing
shortcuts
As the treadle is toed down, machine will start sewing. Once
the treadle returns to neutral, machine will stop immediately.
As the treadle is heeled back, machine will automatically start
trimming cycle.
Continuous back seam
shortcuts
Once the treadle is toed down, all the seams of Bar-Tacking
will be completed with D times, and then the thread will
automatically be trimmed.
Note: When the Bar-Tacking Sewing starts, will not stop until
the trimming cycle finished, except for treadle heeled back to
cancel the action.
Some fixed stitch
shortcuts
As the treadle is toed down, Constant-Stitch Sewing E, F, G or
H performs section by section. Once the treadle returns to
neutral intermediately in any section, machine will stop
immediately. When the treadle is toed down again, the
balance stitches of E, F, G or H goes on. The key adjustable
four, seven-segment, eight, and other multi-sew sewing
patterns. When the display P1 ~ PF press [S] key to confirm
the changes multistage sewing patterns P1 ~ PF is appropriate
to modify the number of segment, the latter two is to modify
the segment pin number.
Multi-set stitch
shortcuts
Enter and
determine/save
button
Enter parameter values such items and their contents chase
after adjustment, need to press the [S] key to save the
confirmation.
Note: The parameters are saved directly by the [S] key.
Mention needles/fill
needle key
Continuous back seam except, any kind of sewing stop, click
for lifting the needle or forward fill half needle. Any kind of
sewn termination is not tangent, click for lifting the needle or
forward fill half needle.
Automatically trigger
button
1. In Free sewing: One touch of this key makes beep sound
without any function also LED does not light up.
2. In Constant-Stitch Sewing: One shot to the pedal, stitches
number of E, F, G or H will be automatically performed. Toe
down the pedal again and again to finish the rest sections
until it finish pattern.
Tangent line function
keys
1. Set or cancel the use of the tangent function.
2. The corresponding icon is not lit, turn off the corresponding
functions.
Function key enter
parameter area
Under normal mode, press the [P] key to enter the user
parameter mode. Press and hold the [P] key to boot into
parameter mode Technician.
Set value
increment/parameter
increment key
1. A, B, C, D, E, F, G, H section, increase the number of setting
stitch.
2. Increase the parameter in Parameter selection.
3. Increase the setting value in Parameter value.
Set value
decrement/decrement
key parameters
1. A, B, C, D, E, F, G, H decrease the number of setting stitch.
2. Decrease the parameter in Parameter selection.
3. Decrease the setting value in Parameter value.
www.garudan.cz