Garudan GF-1107-147 MH, User'S Manual And Spare Parts Book

Page: 13 / 68

ANITA ©
MP02300EN_170818 13
12. Threading the machine head
Warning: Turn OFF the power before starting the work so as to prevent
accidents caused by abrupt start of the sewing machine.
13. Winding the bobbin thread
1. Insert the bobbin deep into the bobbin
winder spindle ① until it will go no
further.
2. Pass the bobbin thread pulled out from
the spool rested on the right side of the
thread stand following the order as shown
in the figure on the left. Then, wind
clockwise the end of the bobbin thread on
the bobbin several times.(In case of the
aluminum bobbin, after winding clockwise
the end of the bobbin thread, wind
counterclockwise the thread coming from
the bobbin thread tension several times to
wind the bobbin thread with ease.)
3. Press the bobbin winder trip latch ② in
the direction of A and start the sewing
machine.
The bobbin rotates in the direction of C and
the bobbin thread is wound up. The bobbin
winder spindle ①automatically as soon as
the winding is finished.
4. Remove the bobbin and cut the bobbin
thread with the thread cut retainer.
www.garudan.cz