5
Operation
POWER INDICATOR LIGHT
This heater is equipped with a Power Indicator Light.
The light will illuminate when the unit is plugged in.
This heater has two heat settings: High and Low. Use the
higher setting (1500 W) to raise the room temperature
quickly. When the desired temperature is reached use
the Low setting. It is usually suffi cient to maintain a
comfortable temperature.
POWER CONTROL DIAL
!
WARNING:
HOT SURFACES Do not touch body of heater when in use.
1
1
2
3
1.
Power Control Dial
2.
Thermostat Control
3.
Power Indicator
Light
After heater has been turned on and the room has
reached the desired temperature, slowly rotate the
thermostat knob counter-clockwise until the heater
shuts off (you should hear a faint “click”). By leaving the
thermostat at this setting it will automatically maintain
this temperature. To lower temperature, rotate the knob
further counter-clockwise (towards the LOW position).
To raise the temperature, rotate the thermostat knob
clockwise (towards the HIGH position).
SETTING THERMOSTAT
Turn the Power Control Dial to the OFF position before
unplugging or plugging in the heater. Heater should be
unplugged when not in use.
TURNING OFF
043-6080-0 Garrison_Elec Basebrd Htr_EN_5.15.2013.indd 5
043-6080-0 Garrison_Elec Basebrd Htr_EN_5.15.2013.indd 5
5/16/2013 6:31:25 PM
5/16/2013 6:31:25 PM
Process Cyan
Process CyanProcess Magenta
Process MagentaProcess Yellow
Process YellowProcess Black
Process BlackPANTONE 287 C
PANTONE 287 C
