Magnum P62F-Series Ethernet Switches Installation and User Guide (11/01)
8
www GarrettCom com
.
.
2.2.1
Magnum P62F-Series chassis with fiber SC (m.m. or single-mode) connectors
Magnum P62F-5V
Magnum P62F
The Magnum P62F’s chassis houses one main PC board. The front side of the chassis
has a half dozen RJ-45 twisted-pair ports and two 100Mbps full-duplex fiber ports (one on
each side of the RJ-45 ports) as shown in the adjacent picture. The fiber ports operate in full-
duplex mode only to provide higher bandwidth and longer distances on fiber. All the LEDs
are mounted on the top cover to conveniently indicate operating status of all ports.
There is a power on (PWR) indicator, and a SELF TEST (self-test at power up in
progress or failed) for the unit. For each RJ-45 (ports # 2 -7), there are Link and Activity
(LK/ACT) LEDs indicating traffic, and 10/100 (ON for 100Mbps), and full/half (F/H)
duplex indicators. The fiber ports (#1 and 8), have (LK/ACT) indicators.
The rugged design of the case using high-strength rugged 18-gauge steel enables this
product to withstand environments with inhospitable high / low temperatures, and makes it
suitable for outdoors, road-side pedestals, control rooms and military use.
The DC power plug connector or “jack” is in the left front of the chassis. The Magnum
P62F Model is typically designed for power input of 24VDC or –48VDC only. The DC
input power supports a wide range, from 20-70 VDC auto-ranging. DC power input is
featured for high reliability and convenience in out-of-the-way locations.
The Magnum P62F-5V is available with an External Power Source (Optional) for
power input of universal AC power using the Magnum PSX-A unit. The 125VDC model
(PSX-T) input power supports a range of 100-275VDC and comes with input safety shield,
fuses, and is diode-protected against accidental reverse polarity connection.
The AC Power Source, PSX-A, is equipped with worldwide range of 85-264vac, 47-
63Hz , auto-ranging with 5VDC , 3Amps Power output. For both models , the military style
