Magnum P62F-Series Ethernet Switches Installation and User Guide (11/01)
4
www GarrettCom com
.
.
1.2
Ordering Information
Magnum P62F, 10/100 Ethernet Switch
with two 100Mb Fiber Port
Magnum P62F-AC-2MSC:
P62F-AC Ethernet Switch with six 10/100 RJ-45 and
two 100Mb FDX fiber multi-mode SC-type ports. Has 16KB address
table and 1.0 MB packet buffers. AC power input, 85-160vac 47-63Hz
worldwide auto-ranging via PSX-A power source Extended Temp ( a
separate unit). Steel case used as a heat sink, designed for use in
environmentally challenged locations as Ethernet outdoors.
Magnum P62F-AC-1MISSC
: Same as P62F-AC-2MSC, except one fiber port is
20km single-mode SC. (includes PSX-A unit)
Magnum P62F-AC-2SSC:
Same as P62F-AC-2MSC, except both fiber ports are
20km single-mode SC. (includes PSX-A unit)
Magnum P62F-AC-NOF
:
P62F-DC Ethernet Switch, six 10/100 RJ-45 and no
fiber ports. Has 16KB address table and 1.0MB packet buffers.
AC power input 85-260vac 47-63Hz worldwide auto-ranging, via
PSX-A Power Source Extended Temp (a separate unit). Steel
case used as a heat sink, designed for use in environmentally
auto-ranging. Steel case used as a heat sink, designed for use in
environmentally challenged locations such as Ethernet outdoors.
Magnum P62F-2MSC:
8-port Ethernet Switch with two 100Mbps full-duplex
switched fiber ports (multi-mode SC-type connector), and six half-
or full-duplex switched RJ-45 10/100 auto-negotiating ports.
Includes store-and-forward switching that filters and forwards data
moving between the ports. The internal switch has 16K nodes
address table and 1MB packet buffers. DC power input, 18-
70VDC auto-ranging.
Steel case acts as a heat sink. Plenum-
and outdoor-temperature rated.
Magnum P62F-1M1SSC:
Same as P62F-2MSC, but with one multi-mode SC-
type and one 20Km single mode SC fiber connectors.
Magnum P62F-2SSC:
Same as P62F but with two 20Km single-mode SC-type
fiber connectors.
