Magnum 6K8-Series Industrial Field Switch Installation and User Guide 03/06)
59
www GarrettCom com
.
.
power input qualifies this product for use in 24VDC, -48VDC as well as 125VDC
environments. The 24VDC, -48VDC or 125VDC power input provides an Ethernet
networking product utilizing a special type of power supply with a proven high-
reliability record to fulfill the DC requirement.
DC Power Terminals
: “+”, “
-
”
,
internally floating
GND
: Terminal for “earth” or ground wire connection to the 6K8-Series chassis
Input Voltage
: 18 to 36 VDC (24VDC)
Input current
: 0.6Amps max.(for all RJ-45 ports)
Input current
: 1.2Amps max.(for all Fiber ports)
Input Voltage
: -36 to -70 VDC (-48VDC)
Input current
: 0.4Amps max.(for all RJ-45 ports)
Input current
: 0.7Amps max.(for all Fiber ports)
Input Voltage
: 88 to 300 VDC (125VDC)
Input current
: 0.1Amps max.(for all RJ-45 ports)
Input current
: 0.125Amps max.(for all Fiber ports)
Power Consumption
: 25 watts max., for fully loaded (fiber ports)
(24V, -48V, 125V)DC
8 watts typical for all (RJ-45 Ports)
B2.0
-48VDC, 24VDC and 125VDC POWER, THEORY OF OPERATION
The -48VDC, 24VDC and
125VDC power options are designed
using diodes inside on each DC power
input line behind the two external power
connection terminals, so that the power
from an external source can only flow
into the switch. This allows the Switch to operate only whenever DC power is correctly
applied to the two inputs. It protects the Switch from incorrect DC input connections. An
incorrect polarity connection, for example, will neither affect the Switch, its internal
power supply, nor will it blow the fuse in the internal power supply.
The manual power “On-Off” Switch (optional) is used for powering the unit on
and off when it is placed into or taken out of service.
B3.0
APPLICATIONS FOR DC
POWERED ETHERNET SWITCHES
Magnum 6K8-Series Switches are
easily installed in a variety of applications
where -48VDC, 24, or 125VDC or 5VDC
power is used as the primary power source.
The DC power configuration capability
A+
A-
GND
GND
CHASSIS
FUSE
+
-
SUPPLY
HUB
POWER SWITCH
DC terminal
block
