16
©2003 GARRETT METAL DETECTORS
PN 1532010 REV A
2.1.4
INTERFERENCE
Many variables can potentially cause interference with any metal detector
operation. However, there are some major variables to address. Electrical
sources of interference, generators, transformers, electrical panels, etc.,
should be kept as far away as possible. Large metallic objects moving or
stationary, revolving doors, elevators, garbage cans, barricades, etc.,
should be kept as far away as possible. Search tables and personnel
should be placed a minimum of 6" from the detector. X-Ray
machines and other complementary screening equipment should be placed
a minimum distance of 12" from the detector.
2.2
UNIT ASSEMBLY
The enclosed instructional video provides detailed assembly instructions.
1.
Verify that the following contents are included:
• Panel "A"
• Panel "B"
• Detection Unit (Head)
• Crosspiece (Support Brace)
• 2’ AC Jumper Cord
• 10’ Power Cord
• Eight 1/4-20x3" Screws
• Eight Finishing Washers
• User Manual
Accessories:
• Instruction Video
• Pocket Item Container (Coin Tray)
• Stabilizing Plates (Optional)
2.
Arrange the major components as shown in Figure 2–1.
FIGURE 2-1
GARRETT PD 6500
i
USER MANUAL
