MAGNASCANNER PD 6500
OWNER’S MANUAL
©2000 GARRETT METAL DETECTORS, INC.
6/19/00
PN 1531100
7
2.5.1.
CONTROLLER MODULE
The controller module, located in the overhead panel, contains all of the circuit boards
required for operation. The cables that connect the controller module to the side panels
are plugged into connectors at the top of each panel.
The controller module cover
should not be removed except in order to
:
•
Connect wires to remote alarm relays or synchronization circuitry (See
Section 11.4);
•
Attach the battery pack module (See Section 11.5);
•
Revert access codes to factory settings (See Section 5.13).
2.5.2.
POWER MODULE
The power module supplies the power required for operation. Ensure that the power
cord is plugged into the connector on the lower left side of the module.
