MAGNASCANNER PD 6500
OWNER’S MANUAL
14
©2000 GARRETT METAL DETECTORS, INC.
6/19/00
PN 1531100
5.5.1.
ZONE 1-5
(
ZONE 1=165+0%
)
The sensitivity of the first five zones can be adjusted from -15% to +15% of the base
sensitivity. For example an adjustment of zero percent means that the sensitivity of a
given zone is equal to the base sensitivity.
The following are a few examples of adjustments based on a base sensitivity
setting of 165.
ZONE 1= 165+0%
(Zone 1 is set to the base sensitivity)
ZONE 1= 165+15% (Zone 1 sensitivity is 15% greater than the base
sensitivity)
ZONE 1= 165-15%
(Zone 1 sensitivity is 15% less than the base
sensitivity)
Press
ACCESS
for the next zone adjustment or
OPERATE
to resume normal operation.
5.5.2.
ZONE 6
(
ZONE 6=165+192%
)
Zone 6 offers a broader range of sensitivity adjustments. To adjust Zone 6, simply
follow the same instructions for zones one through five, keeping in mind that the zone
sensitivity may be adjusted from 63% less to 192% greater than the base sensitivity.
The installer should consult the supervisor regarding the application requirements of
the installation.
