MAGNASCANNER CS 5000
OWNER S MANUAL
19
' 2000 GARRETT METAL DETECTORS, INC.
4/30/00
PN 11674XX
Revised
8.12. WEATHERPROOFING/FOREIGN OBJECT PROTECTION
STANDARDS:
Meets IP 31, IEC Standard. Degrees of Protection Provided by
Enclosures , CEI 529.
8.13.
PUBLIC SAFETY
The Magnascanner has been tested in accordance to and meets the electromagnetic
safety requirements of:
¥
Institute of Electrical and Electronics Engineers: A Standard for Safety Levels with
Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300
GHz. IEEE C95.1- 1991 section 4.12.
¥
Occupational and Safety Health Administration: Radiation Protection Guide, CFR
1910.97 section (2)i.
¥
National Institute of Law enforcement and Criminal Justice: Stan-
dards for Walk-Through Metal Detectors for Use in Weapons Detection, NILECJ-STD-
0601.00 section 4.11.
¥
Canada Health and Welfare: Performance Standards (Walk Through), RPB-SC-18
section 3.2.2 which addresses the issue of electromagnetic effects to cardiac pacemak-
ers.
Our research has produced no information which would indicate that the Garrett prod-
ucts would have any adverse effects on medical implants, pregnancy, recording media,
or magnetic strips. Any additional recommendations or directives issued by personal
physicians or medical equipment manufacturers should be followed. If, for any reason
(doctor s orders, etc.), a patron objects to being scanned with a metal detector, it is rec-
ommended that an alternative procedure (manual hand search, non-admittance, etc.)
be a part of the overall security plan.
8.14.
INFRARED SENSOR
Improves analysis of detection signal; increases throughput; helps eliminate false
alarms; also provides accurate traffic counter.
8.15.
INTERFERENCE REJECTION
100% sensor coil Faraday shielding. DSP(Digital Signal Processor) automatically sup-
presses or eliminates most noises associated with x-ray devices, video monitors and
communications equipment, such as radios and walkie talkies. RFI-EMI filters provide
attenuation from 10 MHz to 1000 MHz.