Garrett Graphic Target Profiling 1350 Owner'S Manual Download

Page: 49 / 56

Graphic Target Profiling 1350

™

WARNING!

Any metal detector may discover underground

power lines, explosives or other items which when

struck could cause personal injury. When searching

for treasure with your

GTP 1350

, observe these

precautions:

• Do not hunt in an area where you believe there

may be shallowly buried underground electric

lines or pipes.

• Avoid striking any line known to be, or suspected

to be, carrying electrical power.

• Do not disturb any pipeline, particularly if it

could be carrying flammable gas or liquid.

• Use reasonable caution in digging toward any

target, particularly in areas where you are

uncertain of underground conditions.

Summary of Contents for Graphic Target Profiling 1350

























































Search results

Summary of Contents for Graphic Target Profiling 1350

Reviews:

Related manuals for Graphic Target Profiling 1350

Brands by name

Popular brands

Garrett Graphic Target Profiling 1350, Owner'S Manual

Search results

Summary of Contents for Graphic Target Profiling 1350

Reviews:

Related manuals for Graphic Target Profiling 1350

Brands by name

Popular brands