Quick Start
© 2021 Garrett Electronics, Inc. PN 1557200.B.0821
Page 1: ...coil Put rubber washers inside the recess area on the lower stem then insert bolt and nut 2 Assemble the three rod sections to best fit your body 3 Carefully wrap and secure the cable around the shaft of the detector 4 Connect the coil cable to the back of the control box 5 Insert the battery pack 6 Insert headphones into back of detector 6 Prospecting Metal Detector Original GM24k detector ...
Page 2: ...s and hold FEATURES 1 SENSITIVITY Set the sensitivity at a level that does not result in false signals from the ground Very strong ground may result in the symbol on screen and a loud sound this means the sensitivity is too high 2 GROUND BALANCE With the default setting the detector will use XGB to automatically ground balance Tap to lock the ground balance to the current setting Tapping when the ...
Page 3: ...int mode In difficult ground this mode may be affected by mineralization 9 BACKLIGHT Tap to enable the backlight this reduces battery life 10 FREQUENCY SHIFT Hold when turning the detector on to shift frequency useful when there is EMI Use and to change frequencies Power off to save the selection 11 FACTORY RESET Hold when turning on the detector Press and hold button when Fd is on screen to reset...
Page 4: ...Quick Start 2021 Garrett Electronics Inc PN 1557200 B 0821 ...
