Target ID #
Higher number,
Better chance of gold
Beep Mode On
Iron Cancel On
Volume Level
SAT/Threshold Level
Audio Mode
SAT +/-
/-
Thr/-
Iron Cancel
Disc LO/HI
Visual Target ID
Ground strength in
Ground Scan mode
Backlight On
TracLock On
Sensitivity
Power On/
Off
Backlight
TracLock
Ground Scan
-
(Press and hold)
Ground-Sync/Exit Setting Selection
Pinpoint (non-motion) - Press and hold
GM24k Interface
NOTE: Regular text = button TAP
Italic text = button HOLD or Press for one second and release unless indicated to “Press and hold”
FEATURES
1.
SENSITIVITY
- Set the sensitivity at a level that does not result in false
signals from the ground. Very strong ground may result in the symbol on
screen and a loud sound - this means the sensitivity is too high.
2.
GROUND BALANCE
- With the default setting, the detector will use XGB
to automatically ground balance. Tap to lock the ground balance to the
current setting. Tapping when the ground balance is locked will update
the current ground setting to what is under the coil.
3.
GROUND SCAN
- Hold to put the detector into Ground Scan mode. The
top bar displays the ground strength and the two digit numbers display the
ground type (phase). Useful for tracing paystreaks.
Sensitivity
Adjust other settings