INFORMATION
LS4 MINI
Box 203, SE–335 25 Gnosjö
Phone: +46 (0) 370 33 28 00
[email protected]
garo.se
Manual 380285 1.0
Assembly instructions / End User Instructions (EN)
GARO AB
Notes
Cautions
Incorrect installation and testing of the LS4 MINI could
potentially damage either the vehicle and/or the LS4
MINI itself.
Poor quality electricity may harm the LS4 MINI and or
the vehicle. An example of such source of poor quality
electricity may be private power generators.
Do not operate the LS4 MINI in temperatures outside its
operating range – see technical specifications.
All installation must be carried out by an professional
electrician and comply with local installation regulations.
If any questions, please contact your local electrical
authority.
Ensure that the charging cable is positioned so it will not
be stepped on, driven over, tripped on, or subjected to
damage or stress.
Unroll the charging cable to prevent it from overheating.
Do not use cleaning solvents to clean any of the
components. The outside of the LS4 MINI, the charging
cable, and the end of the charging cable should be
periodically wiped with a clean, dry cloth to remove
accumulation of dirt and dust.
Refer to local standards and regulations not to exceed
charging current limitations.
The front door must always be locked in order to ensure
compliance with IP Code IP44.
Ventilation signal from EV is not supported.
Adapters for charging connectors are not allowed to be
used.
Cord extension sets for charging cable is not allowed to
be used.
Content
Manual
LS4 MINI
Keys
4x ALU-CU adapters
4
EN
